Instruction manual

QUALITY

Select the recording quality for the specified channel. Options are:

Network, Standard, High, Super and Ultra.

RECORDING

Assign the recording mode for each channel. Options are:

Continuous, By Motion, By Sensor, By Schedule or Disable.

PRE RECORD

Enable/disable pre-event recording. Pre-event recording time is 5

seconds and only intra-frames are recorded for pre-event recording.

POST EVENT

RECORD

Set the post event recording time duration for the specified channel.

(10~30 seconds)

SENSOR

RECORDING

Enable setting up to 4 sensors for the specified channel using the

mouse or the control button (◀ ▲ ▶ ▼) of the remote control.

AUDIO

Enable/disable audio recording for the specified channel.

 Fixed-available on only from channel 1 to channel 4.

SCHEDULE

Set the recording schedule. Press SEL to go to schedule setup

screen.

3-3-1. Recording Schedules

To setup a recording schedule, select SCHEDULE in the RECORD menu. Navigate through the menu

items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control.

[Channel]: Select the specific channel.

[Setup]: Set up using the left button of the mouse to section under the specific day and time. It can set the

all section under the specific day or time at a time when pressing the specific day or time. It is also

possible to set up recording modes of various type using a Continue(green color), Motion(yellow

color) and Sensor button(red color). It can set easy using a drag-and-drop function of a mouse

control.

[COPY Schedule]: Set the channel 1 schedule and select the square button of CH2 in COPY SCHEDULE

section using the mouse. And, press the COPY button. Then the CH1 schedule is copied to CH2. To

remove the setting value, press the CLEAR button.