Instruction manual

Figure 3.3.1. Recording mode setup screen

Table 3.3.1. Menu items in Recording mode setup

Menu item Description

CHANNEL

Select a channel for applying the following settings using the mouse

or the control button (◀ ▲ ▶ ▼) on the remote control. Press the

right square button to change the setting value of all channels at

once. Once you select an item, then press OK to set value for all

channels.

(RESOLUTION, FRAME RATE, QUALITY, RECORDING, PRE

RECORD and POST EVENT RECORD)

RESOLUTION

Select one type among CIF, Half D1 and D1 using the mouse or the

control button(◀ ▲ ▶ ▼) on the remote control.

FRAME RATE

Set the frame rate for the specified channel. The sum of the frame

rate values from each channel cannot exceed the maximum frame

rates for a specific recording resolution.

Typical values of the maximum frame rate for video are as

follows.

CIF Half D1 D1

N-0441L 120/100fps 120/100fps 120/100fps

N-0840L 240/200fps 240/200fps 120/100fps

N-1640L 480/400fps 240/200fps 120/100fps