Instruction manual

Press a right button of the mouse control just one time if you want to

select an item and please do a double-click if you want to change the

value. Once you select an item, then press OK to set value for all

channels.

(COVERT, BRIGHTNESS,CONTRAST,HUE,SATURATION)

NAME

Set the channel name. Press the right square button and set the

channel name and select OK using the mouse or the control button (◀

▲ ▶ ▼) on the remote control. The name can be made by 10

characters at most.

COVERT

Enable/disable display of the specified video channel in live display

mode.

BRIGHTNESS

Change the brightness value of the specified channel. (0~100)

CONTRAST

Change the contrast value of the specified channel. (0~100)

HUE

Change the hue value of the specified channel. (0~100)

SATURATION

Change the saturation value of the specified channel. (0~100)

3-3. Setup – Recording Mode

Press the SETUP button and select RECORD icon. Then, the RECORD menu is displayed as picture below.

Navigate through the menu items using the mouse or the control button (◀ ▲ ▶ ▼) on the remote control

and change the value of the menu item.