Specifications

Channel Master Operation Manual
P/N 95B-6001-00 (January 2005) page 69
10.7 Sensor Commands
This section lists the sensor commands.
SZ – Zero Pressure Sensor
Purpose Zeros the pressure sensor.
Format SZ
Recommended Setting. Use as needed.
Description This command zeros the pressure sensor at the specific loca-
tion where the Channel Master will be used.
ST – Temperature Units
Purpose Sets the units for the temperature sensor in the PC2 test.
Format STn
Range n = 0 (Celsius), 1 (Fahrenheit), 2 (Kelvin)
Default ST0
Description Sets the units for the temperature sensor as output by the PC2
command (see “PC – User-Interactive Built-In Tests,” page
64).
NOTE. This command does not change the temperature units in the
Variable Leader Data (see “Variable Leader Data Format,” page 88).