Specifications

Channel Master Operation Manual
P/N 95B-6001-00 (January 2005) page 65
PC0 – Help Menu
Sending PC0 displays the help menu.
>pc0
PC0 = Help
PC2 = Show Temperature
PC4 = Surface Track Ping - Advanced
>pc2
Temperature (degC)
/ 20.1
NOTE. Use the ST command to change the units for the temperature (see
“ST – Temperature Units,” page 69).
>pc4
Range = 947
PD – Data Stream Select
Purpose: Selects the type of ensemble output data structure.
Format: PDn
Range n = 0 or 14 (see description)
Default PD0
Recommended Setting. The default setting for this command is
recommended for most applications. PD14 is used for integration of the
Channel Master with other systems or data loggers.
Description: The PD command selects the normal output data structure, a
special application data structure, or a fixed data set for trans-
mission/display as the data ensemble (see Table 14).
Table 14: Data Stream Selections
Format Description
PD0 Sends The real water-current data set
PD1 to PD13 Not used.
PD14 Send the Channel Master Condensed 2D Output Format
NOTE. All of RDI’s software supports PD0 formatted data only.