Specifications

Channel Master Operation Manual

P/N 95B-6001-00 (January 2005) page 17

8.2 I/O Cable and Dummy Plug

The I/O cable connector (on the Channel Master housing) and the I/O cable

and dummy plug are molded wet-mate connectors. The I/O cable connector

is a factory-installed item. We do not recommend removing it for any rou-

tine maintenance.

NOTE. The dummy plug should be installed any time the I/O cable is

removed. Use the dummy plug when the Channel Master is in storage or

is being handled.

Straight Out Motion

Retaining Strap

Strain Relief

(Removed)

Strain Relief

(Removed)

Figure 11. Connecting and Disconnecting the I/O Cable