Specifications

Channel Master Operation Manual
page 104 RD Instruments
Table 26: Surface Track Commands Output
Hex Digit Binary
Byte
Field Description
1-4 1,2 VB_CMD_ID / Vertical
Beam Commands ID
Stores the Vertical Beam Commands ID word 4001
(01 40h). LSB is sent first.
5-8 3,4 VM_Blank See VF command.
9-12 5,6 VM_Pings See VP command.
13,14 7 VM_BW See #VB command.
15,16 8 VM_DetectMode See #VC command.
17,18 9 VM_PressScreen See #VC command.
19,20 10 VM_RangeScreen See #VC command.
21,22 11 VM_EdgeDetectThres See #VE command.
23-26 12,13 VM_EdgeDetectDelta See #VE command.
27,28 14 VM_RcvrGain See #VJ command.
29-32 15,16 VM_OffsetTenthsMM See #VO command.
33-36 17,18 VM_ScalePPM See #VO command.
27-40 19,20 VM_MaxRange See #VR command.
41-44 21,22 VM_SubPings See #VS command.
45-48 23,24 VM_XmtLength See #VT command.
49,50 25 VM_WThreshold See #VW command.
51-54 26,27 VM_WWidth See #VW command.
55,56 28 VM_XmitPwr See #VX command.
NOTE. For information on the #V_ commands, see FST-006 (available by
request fro RD Instrument Field Service).