Specifications

Channel Master Operation Manual
page 78 Teledyne RD Instruments
Product Version: CM02.04
CPU Firmware: 28.28f
FPGA Version: 2.00.003
Sensor Boot: 32.02
Sensor Firmware: 33.03
Board Serial Number Data:
24 00 00 00 32 23 40 23 SNS72B-1000-00A
15 00 00 00 31 65 DC 23 PIO72B-2001-00B
A8 00 00 00 10 66 B6 23 XDR71B-1007-00A
E3 00 00 00 1F CD 99 23 PER72B-2006-00X
DC 00 00 00 31 CA 43 23 RCV72B-2003-09A
90 00 00 00 31 AB 7F 23 DSP72B-2002-00A
>
PS1 – Fixed Leader
PS1 sends the Fixed Leader parameters (i.e., fixed system commands and
hardware/firmware information) in Hex-ASCII or binary format with the
Least Significant Byte (LSB) first (see Figure 27, page 101). For example,
a Hex-ASCII output may look like this:
>PS1
3B00001C0D4C21003502320A001900190001480300E8030000320A941100007D2D3D0023000101FF000C000
00000000000000000000000DC1200001914
>
NOTE. The output format of the PS1 command is determined by the CF
command (see “CF – Flow Control,” page 54).
PS2 – Variable Leader
PS2 sends the Variable Leader parameters (i.e., variable system commands
and sensor readings) in Hex-ASCII or binary format with the Least Signifi-
cant Byte (LSB) first (see Figure 28, page 106). For example, a Hex-ASCII
output may look like this:
>PS2
3D8000130004031E10320352000000D005000000000505A40D0000BD0833005F00000000000000000000000
00000000000FFFFFFFF0000000000000000FA14
>
NOTE. The output format of the PS1 command is determined by the CF
command (see “CF – Flow Control,” page 54).