Specifications

Channel Master Operation Manual
P/N 95B-6001-00 (February 2006) page 29
NOTES.
The most recent firmware versions can be seen at Teledyne RDI’s website.
To see what versions a firmware package contains, see the readme file.
A standard firmware package will only upload newer firmware than what is
already in the Channel Master.
The firmware versions in your Channel Master can be displayed with the
PS0 command (see “PS0 – System Configuration,” page 77).
Channel Master firmware packages may contain updates to one or more of
the following: CPU firmware, FPGA firmware, Sensor Boot firmware, or
Sensor firmware. In addition, they may include SDI-12 Boot firmware and
SDI-12 firmware. These are for the optional SDI-12 personality module.
To update your firmware, run the firmware package as described below.
a. Interconnect and apply power to the Channel Master as described in
“Setup the Channel Master,” page 10.
b. Download or copy the firmware update file to your computer’s hard
drive (see “Technical Support,” page 137 for contact information).
c. Double-click the exe file to begin. Click the Setup button when you are
ready to begin the firmware update.
Figure 17. CMFlash Upgrade Utility Program
d. Click the ReadMe button to see what the changes are in the new firm-
ware version. On the License page, click I Agree to continue.