Specifications

Channel Master Operation Manual
P/N 95B-6001-00 (February 2006) page 9
• The Channel Master uses Titanium hardware for the trans-
ducer housing and strain relief. These hardware sets are ex-
pensive and difficult to purchase locally. Don’t loose or
substitute other metal hardware.
• Place a light amount of DC-111 lubricant on the end-cap
connector pins (rubber portion only). This will make it eas-
ier to connect or remove the I/O cable and dummy plug.
• Do not connect or disconnect the I/O cable with power ap-
plied. When you connect the cable with power applied, you
may see a small spark. The connector pins may become
pitted and worn.
• The I/O cable is wet mate-able, not underwater mate-able.
3.3 Deployment Guidelines
• Read the Channel Master Quick Start Guide and the Software
User’s Guides. These guides have tutorials to help you
learn how to use the Channel Master.
• The instrument should be electrically isolated from any
mounting structure to avoid electrolysis problems.