Installation Guide


 NOTE: Do not attach transmission wire or
balun to these points. Transmission wire or balun are
attached to the bottom terminals of the folded UHF
dipole as shown in .
Phasing Rod
Terminal
Dipole
Fig 4
 Attach transmission wire (or balun, if coax installation)
to tap-off terminals at the bottom of the UHF dipole, as
shown in  (or  if a straight UHF screw dipole).
Straight
UHF Dipole
Matching
Transformer
Coaxial
Cable
Folded
UHF Dipole
Tap-Off Terminals
Coaxial Cable
Matching Transformer
Fig 5