Technical data

MESOMATIC Automation und Messtechnik GmbH D-71394 Kernen
2.6. Storage of the configuration and calibration data on PC / floppy disk
The configuration and calibration data can be stored on the PC, or on a floppy disk, by
clicking the 'store' button in the Configuration file section.
Fig. 3
Select the path/drive desired, enter a file name and click ' Öffnen '.
2.7. Storage of the configuration and calibration data in the DK900
Click the 'take over' button in order to store the configuration and calibration data in
the DK900.
Click the 'end' button in order to quit the programme and close the Configuration window.
2.8. Loading of configuration and calibration data from PC / floppy disk
You may load any configuration file stored by clicking the 'load' button in the
Configuration file section.
The following display will appear:
DK900 5