Technical data

MESOMATIC Automation und Messtechnik GmbH D-71394 Kernen
2. Configuration
The configuration and adjustment (start/end adjustment) of the scales is done via a
PC/notebook PC (WIN98 or higher). The respective programme is delivered together with the
instrument, on a floppy disk.
The procedure is as described below:
- Connect the DK900 to the scales.
- Connect the X2 serial interface with the PC (COMx).
- Apply an operating voltage of 24 VDC.
- Turn on the PC and start the configuration programme (DK900CFG_engl.BAT).
Fig. 1
- Select the serial interface to which the instrument has been connected.
DK900 2