User's Manual

Instruction of RF resync code and reset WIFI
LST04-WR 是一款智能 WIFI 灯带，主要功能是通过手机 APP 以及 RF 遥控器实现的。
使用该设备 WIFI 功能之前，需要先进行添加设备。
LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and RF
remote control. Before using the WIFI function of this device, the device needs to be added first.
产品的壳体正面有一个按键。按键操作分为两种：点按和长按。
There is a button on the front of the housing of the product controller. There are two types operation of
button: click and long press.
·点按控制灯带的开关，开启时灯带点亮，关闭时灭。
Click the button to turn on/off the light strip. The light strip will be lightened when turn on and be
dark when turn off.
·灯带关闭时长按进入配网模式：未配网则会进入 EZ 配网模式（万能模式）;EZ 模式下
继续长按进入 AP 配网模式（指定热点配网）;继续长按会在 AP-EZ 之间模式切换;已配
网则会重置 WIFI。
When the light strip is turned off, long press the button on the controller, it will enter the pairing
network mode. If not enter the pairing network mode, it will enter the EZ mode (universal mode).
Continue to long press the button under the EZ mode to enter AP mode (pairing network under
specified hot spot ); Continue to long press the button will switch between the AP-EZ mode; WIFI
will be reset when the network have finished the pairing.
·灯带打开时长按：灯带切换回白光，并调节亮度。
When the light strip is turned on, long press the button on the controller, it will switch to
white light and adjust the brightness.
·RF 配对方式：控制器上电 30S 内来回按下第一组 ON/OFF 按键，若设备受控，表示学
习完成；