LST04-WR User Manual 版本号：V1.1 版次 修订内容 修订人 V1.0 新颁 姬敏杰 V1.1 完善初版 姬敏杰 生效日期 2020.05.1 6 2020.05.
一、 Function summary LST04-WR is an RGB+W light belt that supports mobile phone WIFI communication and RF remote control. It is a smart light belt with functions such as scene mode, dimming and toning, white light mode, and timing.
三、 Product parameters 外观 产品型号 Model# LST04-WR 灯带尺寸 Size of light strip 10*5000mm LED qty/meter 30PCS5050 灯珠/30PCS2835 暖白灯珠 30pcs 5050 RGB LED/30pcs 2835 2700K LED 每米灯珠个数 白光灯珠 2835 色温范围 2835 LED color temperature range 2700K±10% 白光灯珠流明值范围 The lumen value range of 2835 LED 1100lm±20% 控制器尺寸 Size of controller 80*29.1mm 产品颜色 product color White 产品重量 / 产品参数 Product Parameter 电源输入电压/电流 Power input voltage/current AC 120v/60Hz，0.
Instruction of RF resync code and reset WIFI LST04-WR 是一款智能 WIFI 灯带，主要功能是通过手机 APP 以及 RF 遥控器实现的。 使用该设备 WIFI 功能之前，需要先进行添加设备。 LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and RF remote control. Before using the WIFI function of this device, the device needs to be added first. 产品的壳体正面有一个按键。按键操作分为两种：点按和长按。 There is a button on the front of the housing of the product controller. There are two types operation of button: click and long press.
RF pairing method: After the light strip power on, press the first row ON/OFF button on the transmitter repeatedly within 30 seconds. If the device is controlled, stands for the syncing is finished. LST04-WR 遥控器功能说明：Description of transmitter function: ON ：打开灯带 turn on the light strip OFF ：关闭灯带 turn off the light strip UP ：灯带切换为白光亮度增加 light strip switch to white light and the brightness increased DOWN ：灯带切换为白光亮度减小 light strip switch to white light and the brightness decreased.
2. LST04-WR 手机 APP 功能说明 Description of APP function UI 1 UI 2 UI 3 界面以及功能介绍 Interface and function introduction 界面 1：APP 面板打开的默认状态：可以通过开关来开关灯带 UI1: Default status of open APP panel: you can turn on and off the light strip by switch.
界面 2：调色盘面板，可以选择灯带的色彩、亮度以及浓度等参数 UI 2: Palette panel, you can choose the color, brightness, dimming and other parameters.
on the top right corner to finish pairing network according to the reminder------choose the mode and color after the APP connect successfully. (三) 连接 RF 发射器 Connect RF transmitter 连接灯带和控制器并通电 》》上电 30S 内来回按下第一组 ON/OFF 按键 》》若设备受控则连接 成功 》》使用遥控远距离选择开关、选色、模式等功能。Connect the light strip and controller and power it on-----repeatedly press the first row ON/OFF button within 30S-----if the device is controlled, connect successfully----use the transmitter to choose ON/OFF, color, mode and other functions.
FCC STATEMENT : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
