Users Manual

长 兴 博 泰 电 子 科 技 股 份 有 限 公 司
CHANGXING POTEKELECTRONICS & TECHNOLOGY CO., LTD.
四、Instructions
Instruction of RF resync code and reset WIFI
LST04-WR is an intelligent WIFI+RF light strip. The main functions are realized through APP and
RF remote control. Before using the WIFI function of this device, the device needs to be added first.
There is a button on the front of the housing of the controller. There are two types operation of button:
single click and long press.
Single
click the button to turn on/off the strip light.The strip light will be lightened when turn on and be
dark when turn off.
When the strip light is turned off, long press the button on the controller, it will enter the pairing network
mode. If not enter the pairing network mode, it will enter the EZ mode (universal mode). Continue to
long press the button under the EZ mode to enter APmode (pairing network under specified hot spot );
Continue to long press the button will switch between the AP-EZ mode; WIFI will be reset when the
network have finished the pairing.
When the light strip is turned on, long press the button on the controller, it will switch to white
light and adjust the brightness.
RF pairing method: After the light strip power on, press the first row ON/OFF button on the
transmitter repeatedly within 30 seconds. If the device is controlled, stands for the syncing is
finished.
RF delete pairing method: within 30S after the controller is powered on, use a toothpick or
aneedle to press the pinhole RST button on the back of the transmitter, and the transmitter will
have a light flashing indicate the pairing deleted.
Note: With power OFF memory function, it will be remembered after the device state lasts for 5
seconds, and will be restored to ON/OFF state after the next power ON.