User's Manual

4.1.2-System Settings ：Keypad Match-Free Mode
【 Free Mode】 Keypad is able to communicate with any base station freely by inputting the appropriate channel of the base.
【 How to Set】 Free mode is controlled by base station. However the base is set as match mode from factory, we may change it
to free mode in SunVote ARS Tool Kit as shown on the bottom left.
When the free mode base is connected,
follow the steps as below :
Long press 【CH】 for 3 seconds, input
the correct channel when “Channel”
appears on the screen, and press OK to
connect .
It shows “Online” on screen after
successful match.
If failed, keypad will return to the last
matched channel.
For end-user, the keypads and base
station are matched before delivery.
Channel:
-