User's Manual

4.1.1-System Settings ：Keypad Match-Match Mode
【 Why to Match】 Keypad match is to create communication between keypads and base station, and make sure your system is
isolated from other similar systems. Match mode is set by default from factory.
【 How to Match】 Please run SunVote ARS Tool Kit，go to Keypad Match and click “Start” after the base is connected.
Press 【 ↑ 】and 【 ↓ 】 at
the same time for 3 seconds
If failed, keypad will return
to the last matched channel.
For end-user, the keypads
and base station are
matched before delivery.
Matched
List the information of matched keypads