User's Manual

+
-
0001
CH:15
4.2- System Settings: Set ID
Why to Set ID Keypad ID is convenient for device management, test and troubleshooting. ID should be unique
Set Single ID Open Tool-SunVote ARS Tool Kit, click start Setting, and set the initial ID in the Keypad setting window, then
press OK on the keypad. if set successfully, the ID number will be indicated on both keypad and toolkit, and New ID in ARS Tool kit
will add 1 automatically, so please press another keypad to set its ID in ascending order.
ID setting is done as factory default if you are end-user.
7