Service manual

SERVICE MANUAL LS07 chassis
29
Mainboard
groupware JUJ6.690.032-2 8669000322J
Remote control
panel groupware JUJ6.694.016 8669400160J
Key-press panel
groupware JUJ6.694.017 8669400170J
Earphone panel
groupware JUJ6.695.002 8669500020J
TFT LTM150XH-L06 68219601565
inverter INV15-474 59324104740
dynamoelectric
speaker Y2898-01-5W-4 56231105042
Remote control KLC5B 8201803760L
Adapter CHA-1204 8290800520B
Chapter Six the Parameter adjustment of factory
repairment mode Factory mode introduction:
The method of Entering into factory mode: turn down the volume to 0, press
down the key of “mute” in remote control, then press the key of “menu” in
remote control. press CH+ and CH- choose the items which need to adjust.
The method of exiting from factory mode: press the in remote control, after
exiting from the factory mode, you should turn on the TV again.
Now the introduction of the modes which are often used is below, the others are
design parameter mode, not permit to modify .
M6 The fast key is the key of “language”
IFPL Adjust the scale of picture and sound the IF signal
M6 The fast key is the key of “language”
TOP Tune AGC voltage
M13 The fast key is the key of “DVD”
DVD The switch of DVD source
DPF The switch of DPF source
M17
LOGO LOGO display or not
BLUEBACK Blue screen switch
M24
AUTO Auto revise
M25 The fast key is the key of “title”
INIT Initialization program
M28 The fast key is the key of “0”
IIC BUS OPEN Open bus