User Manual

SPECIFICATION:
 Item number: 102714-A
 Power Rate: 1800W
 Voltage:120V~60Hz
 Temperature: 150°F – 450°F (65 °C – 232 °C)
HOW TO USE:
1. Before turning on the power, make sure the cookware is on the
ceramic plate with ingredients inside.
2. After plugging the plug into the socket, the LED indicator will display
the letter “L”, meaning that the temperature of the ceramic glass plate
is lower than 150 °F (65 °C ). If the temperature of the ceramic glass
plate is higher than 150 °F (65 °C ), the LED indicator will display the
letter “H”.
3. To turn the power on, press the ON/OFF button once. The power light
will turn a steady red and heating will begin.
4. To select the proper heat setting, press the REDUCE or INCREASE
button until the correct heat setting is achieved (defaults = 1300 W,
from 300 W – 1800 W).
5. To select the temperature setting, press the TEMP button (default =
180 °F (82 °C)), the temperature light will turn a steady red. Then
press the REDUCE or INCREASE button until the correct temperature
setting is achieved (temperature stages: 120 °F (49 °C) ， 150 °F
(65 °C)，180 °F (82 °C)，210 °F (99 °C)， 240 °F (115 °C)，270 °F
(132 °C) ， 300 °F (149 °C) ， 330 °F (165 °C) ， 360 °F (182 °C) ，
390 °F (199 °C)，420 °F (215 °C), and 450 °F (232 °C)).
6. To select the automatic timer setting, press the TIMER button (default
= 0 min), the timer light will turn a steady red. Then press the REDUCE
or INCREASE button until the correct timer setting is achieved.