Owner`s manual

6
1
2
ON
OFF
Base
Bean Agitation Arm
Chaff Tray
Cooling Tray
Gold Knob
Front
Cover
Top Filter
Bean Insertion-Chute Cover
Rear Filter
Main Cooling Fan
Emergency Eject
Knob
(Not shown)
Control Panel
Hottop Coffee Roaster Parts Diagram
How to Install the Heat-Guard Grills
1) Attach front support on mounting hook, holding the
guard at an angle as shown.
2) Lower rear of guard into position being sure that
both front and rear guard-supports are hooked onto
Coffee Roaster.
To Remove: Wait until machine has cooled to room
temperature. While holding front of guard in place
(1), raise rear of guard until support clears the rear
mounting hook (2).
(panel design
varies by model)
Heat-Guard Grill
Roasting
Chamber
Viewing Window
“K” Sensor
Identifying a “2K” Hottop Coffee Roaster Model
This manual is written for the KN-8828P-2K and the KN-8828B-2K. These can be
easily identified by looking through the roasting chamber Viewing Window. On the rear
wall of the roasting chamber, in approximately the three o’clock position, you will see
the K-style sensor shown here.
WARNING: Always operate the Hottop Coffee Roaster
with the heat-guard grills in place. Do not lift or carry
the Coffee Roaster by the heat guards.