Owner`s manual

34
Modifying a KN-8828P-2K Program
Enter the “Program” mode and select the Program to be modified as described earlier. Press “SET/
SAVE.” The “SET/SAVE” button turns green signifying that you are in the setting mode for changing
parameters for the selected Program. You have entered the area of the flow chart which is indicated inside
the blue rectangle.
TEMPERATURE
When you enter the setting mode, the KN-8828P-2K defaults to Segment 1 and “Temperature.” You
will notice that the all the bars of Segment 1 are displayed and a temperature bar signifying the current
selected temperature for Segment 1 is blinking and the digital temperature display is blinking. Using the
“+” and “” buttons you can now adjust the temperature for Segment 1 as desired.
For any given adjustment, the “+” or the “-” buttons may or may not be illuminated. If a button is not
illuminated it signifies that you have reached the limit for that portion of the range for that specific function
in that Segment. For example, if you have selected the highest programmed temperature for Segment 1,
then the “+” button will no longer be illuminated. When you have completed adjusting the Temperature
for Segment 1, move on to the next adjustment in Profile 1 by pressing “ENTER.”
FAN
Now the Fan icon is blinking and you can adjust fan speed for Segment 1 using the “+” and “-” but-
tons. Adjust the fan speed as you desire, and then press “Enter” to move on.
Any Program (except
Program 0) can be modified.
Modification can be anything
from changing a single en
-
try (such as “Temperature”
for “Segment 3”) to creating
an entirely new program by
modifying every parameter.
The programming process de-
scribed below is illustrated in
this flow chart: