Owner`s manual

22
VIII - Model KN-8828P-2K
Programmable Roaster with LCD Display
The KN-8828P-2K is a programmable roaster with many advanced
features giving the user a lot of control over the roasting profile. It allows
an easy, automatic mode that takes little user input to start. In addition to
the Automatic mode, the KN-8828P-2K also gives the user the ability to
create their own roasting profiles, thus modifying the roasting process to suit their tastes. Internally, the
KN-8828P-2K model is much the same as our other models, and can be maintained in the same way. The
difference is that there is a more sophisticated main circuit board inside the roaster’s base to control the
roasting process and the LCD panel on the outside that give the user far more information and control than
our other models. This section of the manual fully explains the KN-8828P-2K and how to make best use
of all its features.
When first plugging the KN-8828P-2K
roaster into an outlet the user is given
the choice of whether to enter “Auto”
or “Manual” mode.
Time is the total
amount of time left
in the roast and
the current internal
temperature of the
roasting chamber.
The dot matrix “Message
Center” will display various
states and give prompts to
the user for such things as cleaning the
chaff tray, adding the beans, the current
mode during the roast, and more.
The currently displayed
Program which is in the
KN-8828P-2K memory.
One segment
from the
eight-segment
program.
The time super
-
imposed over the
various roasting seg-
ments displays the
amount of time left in
the current segment.
UNDERSTANDING THE LCD DISPLAY
The first thing that you will notice is the LCD display panel. This is the interface between the user
and the roaster. Let’s begin by understanding what is displayed here. Detailed instructions on how to use
the different modes, and how to program the KN-8828P-2K will be found in subsequent sections.
NOTE: The display components vary depending on which mode is in use.
Only the
portion of
the display
outlined in
RED is
visible in
AUTO mode.
The current
speed of the fan.