User Manual

PRIMEX/CHANEY INSTRUMENT CO.

Hong Kong Primex Asia Limited Shenzhen Representative Office

REV (1.3) DATED 28/12/05

Page 7 of 10

5.2.1 The maximum default of Channel 2 is 0 F. The minimum default of Channel 2 is -22

5.2.2 Press and hold Alarm2 for 2 seconds is to enter channel 2 alarm max. setup mode.

The Max. will be displayed as the below figure,

5.2.3 And then press Alarm2 is to enter Min. setup mode (then with key tone), the Min.

will be displayed as the below figure,

5.2.4 Press Alarm2 again under the above mode (then with key tone). The unit will be

back to normal mode and display as the below figure.

5.2.5 If no any button is pressed within 10 seconds, the menu will be back to normal

mode from setup mode.