User Manual

PRIMEX/CHANEY INSTRUMENT CO.

Hong Kong Primex Asia Limited Shenzhen Representative Office

REV (1.3) DATED 28/12/05

Page 5 of 10

4.3 When the temperature value is more than the Max limit 104 F, the unit will display as

following,

4.4 When the temperature value is less than the Min limit -40 F, the unit will display as

following,

5. Alarm Function

5.1 Channel 1 alarm setup mode

5.1.1 The maximum default of Channel 1 is 40 F. The minimum default of Channel 1 is 33

5.1.2 Press and hold Alarm1 for 2 seconds is to enter channel 1 alarm max. setup mode .

The Max. will be displayed as the below figure,