User`s guide

6 DiViS
www.DiViSdvr.com
3-1-1. Site Setup
• New: Register a new site.
• Delete: Delete the registered site.
• Save: Record any changes made.
•
: allows users to sort the list of sites. Select a site
and press either one of the arrow buttons to move an
entry up/down.
• Delete Current User: Remove the user ID currently
logged in with. It will also remove all site information
registered under the ID.
• Backup: Export Config / Setting information.
• Restore: Import and restore Config / Setting information
from an exported file.
• Apply: Apply any changed setting and close the Config
/ Setting.
• Close: Close Config / Setting without applying changes
Note: Any changes will only be effective once the “Save” button is clicked. Clicking on “Close” or “Apply”
without saving will discard all changes. The same site name cannot be registered twice.
Click “New” to register a new site.
• Site name: Assign system’s name or site name. In
the use of IP Server, input the Code number as set
at “Use IP Server” in the DiViS DVR Setting (DiViS
DVR Setting > System > Allow Remote
Connections > Properties).
Note: This code is also necessary for Remote notify.
• Method: Select “TCP/IP” when you are using LAN,
cable modem, ADSL. In case of IP Server, select
“SERVER”.
• Address: Assign the IP address of either the DiViS
DVR system or the IP Server.
• User name: Enter ID, registered in DiViS DVR
system.
• Password: Enter password, registered in DiViS
DVR system