User`s guide

27 DiViS
www.DiViSdvr.com
Check “Allow callers to access my local area network”. In
TCP/IP address assignment, check “Specify TCP/IP
addresses”, and fill out from and to IP address as shown in
picture. It is strongly recommended to use the given TCP/IP
addresses. Click “OK”, and click “Next” at the Networking
Components.
When the connection established successfully, ‘From’ IP will
be the virtual IP of the server, DiViS DVR system, and ‘To’ IP
will be assigned to the client.
Specify the connection name and click “Finish”.
Any name may be used for connection name.
Upon completion of Network Connection Wizard,
the new connection icon will be located in
Network Connection.