User`s guide

21 DiViS
www.DiViSdvr.com
4-3. Event Notification
Event notification allows DiViS Net users to receive notifications from DiViS DVR system when any event
occurs, such as motion and/or sensor detection. In order to activate event notification, following settings are
required under DiViS DVR Setting. Open “System Setup” from the DiViS DVR system to configure settings.
Check “Allow remote connections” and open “Properties.”rrrrr
Check “Remote Notification of events”, and select the method. In IP/Code column, enter IP address or Code
depending on the method selected.
Note: This is the code that needs to be inputted into “Code” section of “IP Server Setup” (4-1-4. IP Server
Setup).