User`s guide
12 DiViS
www.DiViSdvr.com
Press “CAMERA” to bring up the PTZ Control tool.
: PTZ cameras connected to DiViS DVR system can be controlled from DiViS Net.
The arrow buttons will move the camera in the direction of the arrow, and the ZOOM,
FOCUS buttons will manipulate the camera accordingly.
Note: Only users with authorization have access to PTZ Control tool. Authorization
can be set in DiViS DVR setting by enabling “Command control (Pantilt/Image
Control)” (DiViS DVR Setting > User Admin).
: When the PTZ camera supports preset and tour functions, this control is available at
DiViS Net. Number of available preset points depends on the camera features.
Press “IMAGE” to show image control.
: Adjusts the image quality such as Brightness, Contrast, Saturation and Hue via the
arrow buttons.
Press “RATE” to adjust resolution and compression rate.
: Compression Rate can be adjusted between 10 ~ 90 to enhance the transmission
speed (* for default compression rate). Lower compression rate will provide faster
transmission. Resolution can be selected among ½, ¼, or ⅛
(* for default resolution),
and lower resolution provides faster transmission speed. Compression rate and
resolution adjusted here are not changing actual resolution and compression rate
recorded on the server.
Note: This section cannot be applied to hardware compression boards (AMX / D1 /
H.264 series).