DiViS Net (Integration) Installation and User’s Guide Ver 12.10.1 Digital Video Security System Digital Video Recorder www.DiViSdvr.com Chance-i USA Corp. *All contents of this document may change without prior notice, and actual product appearance may differ from depicted herein.
www.DiViSdvr.com Index 1. Specification 2. Installation ············································································································ 3 ··············································································································· 4 3. Using Net software ································································································· 3-1. DiViS Login Setup 3-1-1.
www.DiViSdvr.com Introduction Previously, camera manipulation and data storing/searching were possible only on the DiViS DVR installed computer. This meant that a person must be physically present in front of the specific computer for even minor administration such as checking the current status of the system. This has become a big hassle for those who must overlook many DiViS DVR systems. To overcome these difficulties, DiViS Net has been introduced.
www.DiViSdvr.com 1. Specification • Support TCP/IP. Support communication protocol to log in to DiViS DVR. • Real-time Monitoring of DiViS motion pictures Log in to DiViS Net and monitor all DiViS DVR system images in real time. • Flexible relocation of displayed channels Displayed channels can be moved to desired location on the screen by simple drag and drop.
www.DiViSdvr.com 2. Installation Click 'Setup.exe' and follow the procedure. After installation, the following folder will be created in the Start menu. DiViS Net: DiViS Net program AVI Viewer: Program to view saved video file in MP4 format. Event Viewer: Program to view event log.
www.DiViSdvr.com 3. Using Net software 3-1. DiViS Login Setup Run DiViS Net. The following dialogue box will appear. • Login: ID / password are for the authorized access to DiViS Net program. Note: Login name and password here is for DiViS Net program. It is different from those of DiViS DVR Main. • New: Create a new user profile for DiViS Net program. • Edit: Change the existing information of registered user. • Cancel: Exit without change.
www.DiViSdvr.com 3-1-1. Site Setup • New: Register a new site. • Delete: Delete the registered site. • Save: Record any changes made. • : allows users to sort the list of sites. Select a site and press either one of the arrow buttons to move an entry up/down. • Delete Current User: Remove the user ID currently logged in with. It will also remove all site information registered under the ID. • Backup: Export Config / Setting information.
www.DiViSdvr.com • Port (Properties): Set the port No, which was stored in accordance with “Appendix > 1. DVR Management > 1-3 Advanced” in “Installation and User’s Guide.” It is recommended to use the default data stored in DiViS DVR configurations unless necessary. Click “OK” to finish a new site setting, then the added site will be listed as following. In order to edit the site information already stored, double click on the site name to make changes.
www.DiViSdvr.com 3-1-2. Setup Connection Mode •Single: Check and select one of registered sites to access one site of DiVIS DVR. •Use Auto Login: The DiViS Net will log in automatically using the currently registered ID. •Use Auto Quality Resolution – Use Auto Quality Resolution is a function for adjusting image quality according to the number of channels displayed on a screen. The quality of the images will suffer as the number of channels displayed increases (i.e. 16 or 36 channels).
www.DiViSdvr.com 3-1-3. MISC. Configuration • AVI Path: Assigns the path to store video clips recorded while monitoring. • Log Path: Assigns the path to store the log files. • Log Size: Assigns the maximum size of the log files. • Auto-hide taskbar: turn on the Auto-hide taskbar to hide the taskbar on the bottom of the window. “Save” must be clicked for the changes to take effect. 3-1-4. IP Server Setup •Use IP Server: Enables to use IP Server if checked. •Server: IP address of the IP Server.
www.DiViSdvr.com 3-1-5. Change Login Password •Old Password: Enter current password •New Password: Enter new password •Confirm Password: Confirm new password. “Save” must be clicked for the changes to take effect.
www.DiViSdvr.com 3-2. Accessing DiViS Net Type login and password and click “Login.” : Minimize DiViS Net software in the system tray. Double click to full view. at the bottom right corner to restore • Date/Time: indicates the time and date of the location of DiViS Net • Login name: User ID currently logged in with. • Event Information: Any event notifications from the connected site(s) will appear here.
www.DiViSdvr.com Press “CAMERA” to bring up the PTZ Control tool. : PTZ cameras connected to DiViS DVR system can be controlled from DiViS Net. The arrow buttons will move the camera in the direction of the arrow, and the ZOOM, FOCUS buttons will manipulate the camera accordingly. Note: Only users with authorization have access to PTZ Control tool. Authorization can be set in DiViS DVR setting by enabling “Command control (Pantilt/Image Control)” (DiViS DVR Setting > User Admin).
www.DiViSdvr.com Press “MISC” to control following functions. • Switching (SLOW / FAST): Adjust switching interval when the channel is displaying multiple cameras (Applicable for multiple display only). Each click changes the interval by one second. • Position Number: Displays the position number on the image. • Site Name: Displays the site information on the image. • Camera Number: Displays the camera number on the image. • Camera Name: Displays the camera name assigned at the server.
www.DiViSdvr.com : Changes display mode to 1, 4, 6, 9, 10, 16, or 36 split screens. : Displays next set of view. : Enlarges the image size in single channel display mode. : Reduces the image size in single channel display mode. : Enlarges the DiViS Net screen with minimal control buttons. : Enables on-screen PTZ Control. If enabled on the PTZ camera connected, Using mouse, left click and drag on the screen to pan and tilt the camera, and scroll to zoom in and out : Displays status of current screen mode.
www.DiViSdvr.com 3-3. Remote Search Search data of DiViS DVR system from remote location using DiViS Net. : Click the remote search button to start. The window on the left will show up with list of registered sites Select the site to search, and click “OK” to start remote search. : The calendar allows the user to search data stored on specific dates by simply clicking on the date. The days with stored data are highlighted red.
www.DiViSdvr.com : Change between search tools and image control tools. Search Tools: Buttons in upper line works for fast rewind (left directional arrow) and fast forward (right directional arrow). Buttons in middle line activate the normal playing back in forward and reverse but the speed can be adjusted by controlling ( - ),( + ) tabs on the top. The buttons in lower line give playback frame by frame, forward or reverse.
www.DiViSdvr.com : The user can cycle through other cameras, in groups of four, with these buttons. : The camera icon indicates camera mode. Clicking the icon will toggle to sound search mode to retrieve recorded sound with image. While searching multiple channels, selected camera for audio playback will be indicated with yellow caption as shown below. : Click "Save As" to save the current image in jpg format. : Print the image currently on display. : Save images as a movie clip in AVI or MP4 format.
www.DiViSdvr.com 3-4. Remote Setup : Allow user to change the configuration of DiViS DVR system from DiViS Net. The following screen will allow the user to select the desired site. Select the site and click “OK” Changes will be applied to the selected DiViS DVR system. Some of settings are not accessible from the DiViS Net. Note: Please refer to “5.Configuration” of “Installation and User’s Guide” for further setting guides.
www.DiViSdvr.com 3-5. Event Viewer Event Viewer allows user to review the event log of both DiViS Net software and those received directly from the DiViS DVR system. Please refer to “5-3. System Setup - Allow remote connections” on “Installation and User’s Guide” to set remote notification settings. : opens the following Event Viewer window. Events can be reviewed and/or searched by categories.
www.DiViSdvr.com 4. Appendix 4-1. Changing Position At the connection of DiViS Net software, connected cameras will be positioned in order of camera numbers. It is possible to relocate the camera position to the desired location by left clicking on the image that needs to be relocated, dragging it to the new position, and releasing the left mouse button. 4-2. Movie Clip & Snapshot Either movie clip or snapshot can be created while monitoring.
www.DiViSdvr.com 4-3. Event Notification Event notification allows DiViS Net users to receive notifications from DiViS DVR system when any event occurs, such as motion and/or sensor detection. In order to activate event notification, following settings are required under DiViS DVR Setting. Open “System Setup” from the DiViS DVR system to configure settings. Check “Allow remote connections” and open “Properties.”rrrrr Check “Remote Notification of events”, and select the method.
www.DiViSdvr.com Exit “System Setup” and enter “Color & Motion” configuration under “Camera Setup.” Check “Detective motion – Notification”. Click on “Properties”, and check “Remote Notify” to send notifications when an event occurs. Check “Use Notify Schedule” to utilize the schedule to notify the DiViS Net. If selected, notification schedule on the following page must be configured. Set up “Notify schedule” under the “Scheduling” tab of “Camera Setup.
www.DiViSdvr.com 4-4. Dial-Up Connection In order to connect to the DiViS DVR system through regular phone connection, both the DiViS DVR system and the DiViS Net System need to be equipped with modem, and the Dial-Up Server / Client must be configured as well. The following instruction is based on the Windows XP environment. 4-4-1. Installation of Dial-Up Server On DiViS DVR system, click “Start > Control Panel > Network Connections.” Click “Create a new connection.” .
www.DiViSdvr.com Select “Set up an advanced connection”, and Click “Next”. Check “Accept incoming connection” and Click “Next”.
www.DiViSdvr.com Select “Do not allow virtual private connections”, and click “Next”. Click “Add” to add a new user. The user must be created to allow connection to the DiViS DVR system. Fill out the user information and click “OK”. This user information must be used at the Dial-Up Client, which will be discussed on the next section. Note: The “Allowed User” means “RAS User” who can access the Dial-Up server from Dial-Up Client.
www.DiViSdvr.com Once a new user is created and registered, check to see that the user created is selected and click “Next”. Select “Internet Protocol TCP/IP” and click ‘Properties’.
www.DiViSdvr.com Check “Allow callers to access my local area network”. In TCP/IP address assignment, check “Specify TCP/IP addresses”, and fill out from and to IP address as shown in picture. It is strongly recommended to use the given TCP/IP addresses. Click “OK”, and click “Next” at the Networking Components. When the connection established successfully, ‘From’ IP will be the virtual IP of the server, DiViS DVR system, and ‘To’ IP will be assigned to the client.
www.DiViSdvr.com 4-4-2. Installation of Dial-Up Client On DiViS Net system, click “Start > Setup > Control Panel > Network Connection.” Click “Create a new connection.” Click ‘Next’. Select “Connect to the Internet”, and Click “Next”.
www.DiViSdvr.com Select “Set up my connection manually”, and Click “Next”. Select “Connect using a Dial-Up modem”, and Click “Next”. Set ISP Name as you want, and Click “Next”.
www.DiViSdvr.com Enter the phone number which is assigned to the DiViS DVR system, and Click “Next”. Enter the user information, which was created on the DiViS DVR system, and Click “Next”. Click “Finish” to complete setting.
www.DiViSdvr.com 4-4-3. Using Dial-Up Connection • On DiViS DVR system Make sure that the Dial-Up Server is configured and that the DiViS DVR Main software is running. • On DiViS Net System, Click “Start > Setup > Control Panel > Network Connection.” The icon for the Dial-Up will be displayed with the name assigned during configuration process. Double click on the icon. The desired connection in the picture to the left would be the connection named “dvr.” Verify the user name, password, and Dial number.
