User`s guide

25 DiViS
www.DiViSDVR.com
Check “Allow callers to access my local area network”.
In TCP/IP address assignment, check “Specify TCP/IP
addresses”, and fill out from and to IP address as shown
in picture. It is strongly recommended to use as it is
shown. Click “OK”, and click “Next” at the Networking
Components.
When the connection established successfully, ‘From’ IP
will be the virtual IP of the server, DiViS DVR System,
and ‘To’ IP will be assigned to the client.
Specify the connection name and click
“Finish”. Any name may be used for
connection name.
Upon completion of Network Connection
Wizard, the new connection icon will be
located in Network Connection.