User`s guide

20 DiViS
www.DiViSDVR.com
5.3. Event Notification
Event notification allows DiViS Net users to receive notification from DiViS DVR System when any
event occurs, such as motion and/or sensor detection. In order to activate, following settings are
required at the DVR Main. Open System Setting from the DiViS DVR System to configure settings.
Check “Allow remote connections” and open properties. Check “Remote Notification of events”, and select
the method. In IP/Code column, enter IP address or Code depending on the method selected.
Note: The code shall be same as the one entered in “Code” at 4.1.3. IP Server Setup