User`s guide

12 DiViS
www.DiViSDVR.com
Press “CAMERA” to control the PTZ.
: PTZ cameras connected to DiViS DVR System can be controlled from
DiViS Net. The arrow buttons will move the camera in the direction of the
arrow, and the ZOOM, FOCUS buttons will manipulate the camera
accordingly. However, only user with permission can control the PTZ
setting.
The number in the middle circle indicates the camera number being
controlled, and the push of top or bottom arrow button makes the selection
of the camera.
: When the PTZ camera supports preset function and tour, this control is
available at DiViS Net. However, settings of preset and tour must be made
at DiViS DVR System. And No. of available preset points are depending
on the camera’s feature.
Press “IMAGE” to show image control.
: Adjusts the image quality such as Brightness, Contrast, Saturation and
Hue by pushing the arrow buttons.
Press “RATE” to adjust resolution and compression rate .
: Compression Rate can be adjusted between 10 ~ 90 to enhance the
transmission speed (* for default compression rate). Lower value will
provide faster transmission. Resolution can be selected among 1/2, 1/4, or
1/8 (* for default resolution), and lower resolution provides faster
transmission speed. Compression rate and resolution adjusted here are
not changing actual resolution and compression rate recorded on the
server.
Note: this section cannot be applied to MPG series products.