User`s guide

56 DiViS

www.DiViSdv

.com

4. MC (Media Control) Setup – Windows XP Only

Due to the variety of the sound controller while it is making a transition to high-quality on-board controllers, the

configuration and the behavior are not standardized. Therefore, it is required to run “MCSetup.exe” prior to utilize

audio recording function of DiViS products. It is located under DiViS DVR (or DVR System) folder. AMX / D1

Series products and the 16 channel audio board do not require this procedure. This procedure is also not

required on Window Vista or Windows 7. Before running MCSepup.exe, make sure to connect speaker and

microphone, and verify the connection using sound utility tool, provided with the motherboard or sound card. The

following instruction and pictures are based on Sigma Tel Audio device, and terms for controls may be different

for other devices.

Note: The color set of the audio ports may be different depending on the motherboard. However, most

motherboards generally use blue for Line In, pink for Mic. In, and green for Line (Speaker) Out.

Media Control Setup

• Run “MCSetup.exe”.

Select a device to setup, and

click next.

• Mixer Controls Setup

If there are more than two

devices available, make sure to

select a correct device.