User`s guide

53 DiViS
www.DiViSdv
r
.com
<< Example >>
• Data searching after transferring one hard drive to another machine
1. Install hard drives.
2. Install DVR software.
3. Run DBTool.exe.
4. Check drives to use in ‘DB file found in Disk’.
5. Press ↑ to add the selected drive(s) to ‘DB Information of the system’.
6. Press ‘Modify’ after selecting a drive from ‘Select a drive to start saving data’.
7. Press ‘Apply’ to finalize.
Note: Make sure that the drives checked in ‘DB file found in Disk’ are shown in the list of drives listed in
‘DB Information of the system’ as well.
• After using this tool to reconfigure the drives, it will be possible to search through the files located on imported
drives.
• By copying or transferring the ‘M4DATA’ folder to another machine, it will be possible to search through the
saved files immediately as long as the DVR program is installed on that machine.