User`s guide

18 DiViS
www.DiViSdv
r
.com
• Log Write: Record Log files (Log can be viewed with Log Viewer in Utility.)
- System log: Time information of Main, Search, Setting start / end.
- Sensor log: Log for sensor detection.
- Motion log: Log for motion detection.
- User log: Log information of User login.
- Loss log: Log for Video Loss.
- Disk log: Log for last recorded time and disk full
warning.
- Log File Size : Sets up log file size
• Screen: Initial setting for main program.
- Initial screen: Number of camera shots that will be displayed when DVR Main is loaded.
- Normal, Large, Full: Size of the camera shots displayed when system is started.
- TV-out auto switching interval: The amount of time each camera shot will be displayed
intermittently through the Composite-Out port.
-- Normal: Displays the current camera shots of the monitor.
-- 1 View: Sequential switching of each camera.
-- 4 View: Sequential switching of 4 cameras.
(CAP series only support 1 view sequential switch.)
-- AMX boards do not support this feature since they output the same screen that is being displayed on the
monitor.
- PC Screen auto switching interval: It sets the time interval between one split screen shot and the next, and
it only applies when the “Auto Switching” button is activated
• Auxiliary Functions
- Sound recording: This option allows camera images to be recorded with sound.
Press “Properties” button to set sound configurations.
(Systems with AMX or D1 series do not have “Property” button available, and it will be configured as 4, 8, 16, or
32 channels depending on the model.)
-- Installed Audio Devices: If there is a sound device, up to 2
channels of sound recording can be enabled.
For 16 channels, an optional sound card is required (ACAP
series only).
-- Select Channel: Choose number of sound channels.