User`s guide

17 DiViS
www.DiViSdv
r
.com
• Startup
- Auto Startup: Enable automatic startup of DVR Main Program upon system startup.
Properties:
-- Use Auto Logon: Select to logon to Windows automatically on system startup (if there are multiple
user accounts available on the system.)
--- User Account Name: Select a user account which will be used to logon to Windows
automatically. (Only administrators can be selected, and you cannot
login with any other user accounts if you have selected “Only User”
during installation process.)
--- User Account Password: Enter the password of the selected user account. Leave it blank if the
account does not have a password.
-- Delay Time: Allows users to delay (in second) the execution of DVR Main program.
- Enable hardware watchdog (Auto recovery): If enabled, the watchdog will reboot the entire system if it
becomes unstable or encounters errors.
- Schedule auto reboot of DVR: If enabled, a schedule to reboot
the entire system automatically can be set by clicking “Properties.”
This reboot is independent from the watchdog functionality.
Note: “Auto Startup” option must be enabled in order to run DVR
Main automatically on system startup.
-
-
- Startup Event Notify: If enabled, email notification will be sent out upon the program startup.
Using reserved parameters, it is possible to send starting time (“$$2”) and assigned IP
address (“$$3”). Refer to Chapter 5.7 - Event Setup for more details.