User's Manual

56 Appendices

APPENDIX A PIN DEFINITIONS AND CONNECTOR TYPES

Physical Connections

Ethernet Connector

1 - TxC

2 - Tx-

3 - RxC

6 - Rx-

Cable between Shuttle

and network

connection:

Use a standard, ‘8 pin’, 1-to-1 Ethernet

network cable to connect the Shuttle

to your Ethernet network.

IMPORTANT

Make sure you apply proper cabling when using the

SG-15

Colour

Power-over- Ethernet version (IEEE802.3af PoE).

PoE uses either the 4 data lines (1,2,3,6), called End-Span, OR the

not used lines (4,5,7,8), called Mid-Span.

Which method is used, depends on the supplying network switch.

The Shuttle

SG-15

Colour

supports both methods automatically.

See Chapter 1.4 for the physical location of the connectors.

DC Power connector

1 GND

2 +5 VDC

Front view