User's Manual

Scantech-ID Shuttle
C
SG-15
Colour
15
2.3.4 Software & Control
The functions during daily use of the Shuttle
C
are determined by the application
program, which is controlling the Shuttle
C
. So the task of the storage of
databases, providing the information and sending it to the display of the Shuttle
C
will be performed by a central host system.
Providing this application, running on the host system, is the responsibility of the
System Integrator.
Barcode
Database
Barcode
Product and
graphical info
Product
info
Host
Application
(by System
Integrator)
The SG-15
Colour
sends barcodes to the host, according to the following table:
CODE MESSAGE FORMAT
EAN-13 F D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 [CR]
EAN-8 FF D1 D2 D3 D4 D5 D6 D7 D8 [CR]
UPC-A A D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 [CR]
UPC-E E Ø D1 D2 D3 D4 D5 D6 [CR]
ITF i D1 - Dx [CR]
Code 39 * D1 - Dx [CR]
Code 32 * D1 - Dx [CR]
Codabar % D1 - Dx [CR]
Code128 # D1 - Dx [CR]
EAN-128 P ]C1 D1 - Dx [CR]
DataBar R D1 - Dx [CR]
The Shuttle
C
documentation and the demo/set-up programs provide you with
all the required information on how to communicate with the Shuttle
C
and how
to control it. The SG-15
Colour
Product Support Library contains all kind of source
code examples and a complete example for application software (incl. free source
code), including an Ethernet driver to enable the integrator to get the SG-15
Colour
up and running in no time.
Shuttle
C