User's Manual

2.4.5.12 Menu Scrolling
On the sub-menu, select “Menu Scrolling” to set whether the scanner
menu is scrolling when pressing UP/DOWN and reaching the last item.
Menu Scrolling
Disable
UP/DN - change
OK - confirm
Press UP or DOWN to set disable or enable. Press OK to confirm.
2.4.5.13 Brightness
On the sub-menu, select “Brightness” to set the LCD brightness.
Brightness
Level
08
UP/DN - change
OK - confirm
The brightness is ranged from level 1 to level 15. Press UP or DOWN to
set the level. Press OK to confirm.
2.4.5.13.1 Factory Default
On the sub-menu, select “Factory Default” to restore all to factory
default settings.
Factory Default
UP - default
OK - cancel
Press UP to restore the default settings. Press OK to return to the
previous menu.
2.4.5.13.2 Scan Review
On the sub-menu, select “Scan Review” to set the data to show on the
display after scanning. It will be able to review the scanned data right
Factory Default EN