User's Manual

2.4.5.9 Vibration
On the sub-menu, select “Vibration” to set if vibrating when scanning
barcodes.
Vibration
Disable
UP/DN - change
OK - confirm
Press UP or DOWN to set disable or enable. Press OK to confirm.
2.4.5.10 Auto Exit
On the sub-menu, select “Auto Exit” to set auto exit the screen menu.
Auto Exit
Enable
UP/DN - change
OK - confirm
Press UP or DOWN to set disable or enable. Press OK to confirm.
2.4.5.11 Data Format
On the sub-menu, select “Data Format” to set the information shown
on scanner LCD when data review.
Data Format
Code Only
UP/DN - change
OK - confirm
Press UP or DOWN to select the information as following options.
 Time & Battery & Code
 Memory & Code
 Code Only
Press OK to confirm.
Vibration EN
Vibration DIS