User's Manual

2.4.4 Data Process Menu
On the top menu, select “Data Process” for advanced data
configuration.
View Data
BT Configure
BT Service
Data Process
The sub-menu is as following.
Store Mode
Repeat Code
. . Return
2.4.4.1 Store Mode
On the “Data Process” sub-menu, select “Store Mode” for following
options.
Store Mode
Send & Store
UP/DN - change
OK - confirm
 Send & Store: Send the scanned barcodes to host and store the
barcodes in scanner memory simultaneously.
 Store Only: Only store the scanned barcode in scanner memory
without sending to host.
 Send Only: Only send the scanned barcodes to host without
storing in scanner memory.
Press UP or DOWN to set the options. Press OK to confirm.
2.4.4.2 Avoid Same Code
Select “Avoid Same Code” to set if 2 continuous barcode scanning is not
allowed reading identical barcode. In other words, this is to set if the
scanner cannot read the same barcode twice continuously.
Send & Store EN
Store EN