User's Manual

7.6.2 Disable All Symbologies.

If you want to disable all Symbologies, please

scan below programming code. Or you can scan

the “Off” option to disable individual symbologies.

Disable All Symbologies

Note: Do not reset individual parameters settings for

each symbology. When you enable a symbology, you

will recover the parameter settings stored in memory.

Anytime, you may reset to factory defaults by scanning

the programming code of “Set factory default” (please

see 7.1.1)

7.5 Australian Post Settings

7.7.1 Symbology Identifier

7.6 Aztec Settings

7.8.1 Structure Append Mode

Active

< Not Active>

7.8.2 Aztec Runes

Active