User's Manual

11
5. Operating Settings
5.1 Scanning Triggering
<Level>
A reading session begins (lighting and decode
processing on) when beam is activated and stops
when beam is deactivated.
Continuous Scanning
When the scanner is turned on a continuous reading
session begins (lighting and decode processing on).
Note: The continue scanning mode doesn’t
support the IG-300BT series.
Pulse
A reading session begins when beam is activated and
stays on until a period of inactivity lasting the time
specified by the timeout.
After the timeout, the scan engine turns off.
Note: The pulse mode does not support the
IG-300BT series.
Continuous + Flashing
When the scan engine is turned on, a reading session
begins (no need to activate the beam).
After a period of inactivity lasting the time specified by
the timeout, the scan engine starts flashing, checking
for a barcode to be read.