User's Manual

8
4) If successful, Blue LED of scanner will slow flash.
5) If the connections failed the scanner indicates with
3 shot beeps.
3.3.4. Sleep Mode
The scanner is equipped with sleep mode function to
save battery energy when the scanner is not used for 1
minute or 10 minute (setting by scanning the according
programming code, please see chapter 7.). During
sleep mode, all the functions and connection will be
halted until pressing the trigger button of scanner to
wake up and reconnect the communication with the
cradle or Bluetooth device.
3.3.5. Batch Mode
This Batch mode function is enabled when you have
scanned “Memory ON” barcode. Scanning data is
stored in the memory of the scanner. This function is
disabled when you have scanned “Memory OFF”
barcode.
When the communication reconnected again, you can
scan the barcode “Memory read” barcode to transmit
the stored data to cradle immediately. Or scan the
“Memory clear” barcode to erase all stored memory.
The capacity of this memory depends on the scanned
data size,
approximately 1,000 sets of data .