User Manual

10
92750-1 ENGLISH
ASSEMBLY
6) Install the Engine and Hoses Cont’d.
6) Install the Engine and Hoses
1. Attach the engine/pump to the engine mounting plate
on the hydraulic oil tank. (A)
2. Place O-ring into the outlet fitting on the top of the
pump. (A)
3. Connect one end of the high pressure hose to the
pump outlet fitting and the other end to the inlet on
the control valve. (B)
The swivel nut end of the high pressure hose
connects to the pump outlet.
NOTE
4. Connect one end of the clear oil hose to the hydraulic
oil tank just beneath the engine and the other end to
the pump inlet on the bottom of the pump. (C)
C
B
A
D
5. Connect one end of the oil return hose to the outlet
barb fitting on the control valve and the other end to
the barb fitting on the oil tank. (D)
Red shipping plugs must be removed from hydraulic
pump prior to installing hoses.
Hydraulic pump may
contain residual oil from
testing procedures during
production. We recommend
using an oil tray under the
pump before removing the
shipping plugs.
CAUTION