Owner manual

REV 92750-20131216 18
92750 ENGLISH
SPECIFICATIONS
When temperature is below 0ºC (32ºF) use
universal tractor/transmission fluid.
NOTE
Oil
Use 10W-30 automotive oil.
Oil capacity is 0.6 qt (0.6 L).
DO NOT OVERFILL.
Please reference the following chart for recommended
oil types for use in the log splitter.
Fuel
Fuel capacity is 0.5 gallons (2 L). Use regular unleaded
gasoline with a minimum octane rating of 85 and an
ethanol content of less than 10% by volume.
Log Splitter Specifications
– Ram Force ........................ 27 Ton
– Max Cycle Time ................. 16 seconds
– Hydraulic Tank Capacity ..........5 gal. (18.9 L)
– Max Log Length ............ 23.8 in.(60.3 cm)
– Max Log Weight .............. 100 lb. (45 kg)
– Coupler Ball Size ............... 2 in. (5.1 cm)
– Tire Size ...................40.6 cm (16 in.)
– Max towing speed ...........72 km/h (45 MPH)
– Engine ................. 208cc, OHV, 4 stroke
– Cylinder size ....4.7 in. x 23 in. (12 cm x 58.4 cm)
– Cylinder rod size ..............1.8 in. (4.5 cm)
– Hydraulic Fluid Type ..............10W AW32,
......................ASLE H-150, ISO 32
– Gear Pump ........................2-stage
– Max pressure .....................3600 psi
– Max flow capacity ..........11 GPM (41.6 LPM)
– Control Valve ............. Detent (auto-return)
– Overall Dimensions
– Gross Weight ............... 485 lb. (220 kg)
– Net Weight ................440.9 lb. (200 kg)
– Height .................. 45.9 in. (116.5 cm)
– Width ....................40.9 in. (104 cm)
– Length. . . . . . . . . . . . . . . . . . . .86.2 in. (219 cm)
Maintenance Valve Clearance
– Intake: 0.10 – 0.15 mm (0.004 – 0.006 in.)
– Exhaust: 0.15 – 0.20 mm (0.006 – 0.008 in.)
Note: Tech bulletin regarding the valve adjustment
procedure is on www.championpowerequipment.com.
Spark Plugs
OEM spark plug: NHSP F6RTC
Replacement spark plug: NGK BPR6ES or equivalent
Make certain the spark plug gap is 0.6 - 0.8 mm or
(0.024 - 0.031 in.).
Hydraulic Oil System
Oil capacity is 6.5 gallons (24.6 L).
Use types 10W AW32, ASLE H-150, ISO32 or universal
hydraulic fluid.
Engine Specifications
– Model ............................ 170F
– Displacement .......................208cc
– Type ........................4-Stroke OHV
– Start Type .........................Recoil
Oil Cont’d.