User Manual

REV 11008-20120905 10
11008 ENGLISH
SPECIFICATIONS
Performance Specifications
– Rated Pull .................................... 10,000 lbs (4536 kg)
– Gear Reduction Ratio ....................................... 216:1
– Motor .......................... Series Wound Motor 3.6 HP/2.7 kW (12V DC)
– Duty Cycle ..................................... Intermittent Use Only
– Drum Size .................... 2.48” (D) x 8.84” (L) [63 mm (D) x 224.5 mm (L)]
– Cable ............................ 3/8” (D) x 85’ (L) [9.2 mm (D) x 26 m (L)]
– Gross Weight ...................................... 92.5 lbs. (42 kg)
– Net Weight ....................................... 85 lbs. (38.6 kg)
– Height ....................................... 10.5 inches (26.7 cm)
– Width ........................................ 5.6 inches (14.2 cm)
– Length ...................................... 21.9 inches (55.5 cm)
– Bolt Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10” x 4.5” (25.4 cm x 11.43 cm)
Line Speed and Motor Current (First Layer)
Line Pull
LB 0 2000 4000 6000 8000 10000
KG 0 907 1814 2722 3629 4536
Line Speed (12V DC)
FPM 15.7 9.8 7. 2 5.9 4.9 3.9
MPM 4.8 3.0 2.2 1.8 1.5 1.2
Max Current A 115 175 220 280 320 400
Run Time* Minutes 1 1 1 1 1 1
Cooling Time** Minutes 5 5 5 5 5 5
Line Pull and Cable Capacity Per Layer
Line of Cable 1 2 3 4
Rated Line Pull
LB 10000 8000 6600 5600
KG 4536 3629 2994 2540
Cable Capacity
FT 18 39.4 64 85
M 5.5 12 19.5 26
– Use double line and snatch block for pulling loads over 8,000 lbs. (3628.7 kg).
* If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down for 5 minutes. Do not
pull for more than one minute at or near the rated load.
** Electric winches are designed and made for intermittent use and should not be used in constant duty applications.