Owner manual

REV 10020-20131126 10
10020 ENGLISH
SPECIFICATIONS
Performance Specifications
– Rated Pull ...................................... 2,000 lb. (907 kg)
– Gear Reduction Ratio ....................................... 171:1
– Motor ........................... Permanent Magnet 1.2 HP/0.9 kW (12V DC)
– Duty Cycle .......................................... Intermittent
– Drum Size ......................1.5 in. (D) x 3.2 in. (L) [38 mm(D) x 80 mm(L)]
– Cable .......................... 5/32 in. (D) x 49 ft. (L) [4 mm(D) x 15 m(L)]
– Gross Weight ...................................... 20.9 lb. (9.5 kg)
– Net Weight ....................................... 18.7 lb. (8.5 kg)
– Height ..........................................4.4 in. (112 mm)
– Width .......................................... 4.4 in. (112 mm)
– Length ........................................ 12.9 in. (328 mm)
– Bolt Pattern. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.9 in. x 3 in. (124 mm x 76 mm)
Line Speed and Motor Current (First Layer)
Line Pull LB 0 500 1000 1500 2000
KG 0 227 454 680 907
Line Speed (12V DC) FPM 9.84 8.20 6.56 5.58 4.27
MPM 3.0 2.5 2.0 1.7 1.3
Motor Current (12V DC) A 15 40 65 100 140
Running Time* Minutes 1 1 1 1 1
Cooling Time** Minutes 5 5 5 5 5
Line Pull and Cable Capacity Per Layer
Line of Cable 1 2 3 4 5
Rated Line Pull LB 2000 1630 1380 1190 1050
KG 907 739 626 540 476
Cable Capacity FT 8 17 2 7.6 39.4 49
M 2.4 5.2 8.4 12 15
*If the motor becomes uncomfortably hot to the touch, stop winching immediately and let it cool down for 5 minutes.
Do not pull for more than one minute at or near the rated load.
**Electric winches are designed and made for intermittent use and should not be used in constant duty applications.
It is recommended to use double line and snatch block for pulling loads over
1000 lb. (454 kg).